Shortcuts

Windows FAQ

Building from source

Include optional components

There are two supported components for Windows PyTorch: MKL and MAGMA. Here are the steps to build with them.

REM Make sure you have 7z and curl installed.

REM Download MKL files
curl https://s3.amazonaws.com/ossci-windows/mkl_2020.0.166.7z -k -O
7z x -aoa mkl_2018.2.185.7z -omkl

REM Download MAGMA files
REM version available:
REM 2.5.2 (CUDA 9.2 10.0 10.1 10.2) x (Debug Release)
REM 2.5.1 (CUDA 9.2 10.0 10.1 10.2) x (Debug Release)
REM 2.5.0 (CUDA 9.0 9.2 10.0 10.1) x (Debug Release)
REM 2.4.0 (CUDA 8.0 9.2) x (Release)
set CUDA_PREFIX=cuda92
set CONFIG=release
curl -k https://s3.amazonaws.com/ossci-windows/magma_2.5.1_%CUDA_PREFIX%_%CONFIG%.7z -o magma.7z
7z x -aoa magma.7z -omagma

REM Setting essential environment variables
set "CMAKE_INCLUDE_PATH=%cd%\\mkl\\include"
set "LIB=%cd%\\mkl\\lib;%LIB%"
set "MAGMA_HOME=%cd%\\magma"

Speeding CUDA build for Windows

Visual Studio doesn’t support parallel custom task currently. As an alternative, we can use Ninja to parallelize CUDA build tasks. It can be used by typing only a few lines of code.

REM Let's install ninja first.
pip install ninja

REM Set it as the cmake generator
set CMAKE_GENERATOR=Ninja

One key install script

You can take a look at this set of scripts. It will lead the way for you.

Extension

CFFI Extension

The support for CFFI Extension is very experimental. There’re generally two steps to enable it under Windows.

First, specify additional libraries in Extension object to make it build on Windows.

ffi = create_extension(
    '_ext.my_lib',
    headers=headers,
    sources=sources,
    define_macros=defines,
    relative_to=__file__,
    with_cuda=with_cuda,
    extra_compile_args=["-std=c99"],
    libraries=['ATen', '_C'] # Append cuda libraries when necessary, like cudart
)

Second, here is a workground for “unresolved external symbol state caused by extern THCState *state;

Change the source code from C to C++. An example is listed below.

#include <THC/THC.h>
#include <ATen/ATen.h>

THCState *state = at::globalContext().thc_state;

extern "C" int my_lib_add_forward_cuda(THCudaTensor *input1, THCudaTensor *input2,
                                        THCudaTensor *output)
{
    if (!THCudaTensor_isSameSizeAs(state, input1, input2))
    return 0;
    THCudaTensor_resizeAs(state, output, input1);
    THCudaTensor_cadd(state, output, input1, 1.0, input2);
    return 1;
}

extern "C" int my_lib_add_backward_cuda(THCudaTensor *grad_output, THCudaTensor *grad_input)
{
    THCudaTensor_resizeAs(state, grad_input, grad_output);
    THCudaTensor_fill(state, grad_input, 1);
    return 1;
}

Cpp Extension

This type of extension has better support compared with the previous one. However, it still needs some manual configuration. First, you should open the x86_x64 Cross Tools Command Prompt for VS 2017. And then, you can start your compiling process.

Installation

Package not found in win-32 channel.

Solving environment: failed

PackagesNotFoundError: The following packages are not available from current channels:

- pytorch

Current channels:
- https://conda.anaconda.org/pytorch/win-32
- https://conda.anaconda.org/pytorch/noarch
- https://repo.continuum.io/pkgs/main/win-32
- https://repo.continuum.io/pkgs/main/noarch
- https://repo.continuum.io/pkgs/free/win-32
- https://repo.continuum.io/pkgs/free/noarch
- https://repo.continuum.io/pkgs/r/win-32
- https://repo.continuum.io/pkgs/r/noarch
- https://repo.continuum.io/pkgs/pro/win-32
- https://repo.continuum.io/pkgs/pro/noarch
- https://repo.continuum.io/pkgs/msys2/win-32
- https://repo.continuum.io/pkgs/msys2/noarch

PyTorch doesn’t work on 32-bit system. Please use Windows and Python 64-bit version.

Import error

from torch._C import *

ImportError: DLL load failed: The specified module could not be found.

The problem is caused by the missing of the essential files. Actually, we include almost all the essential files that PyTorch need for the conda package except VC2017 redistributable and some mkl libraries. You can resolve this by typing the following command.

conda install -c peterjc123 vc vs2017_runtime
conda install mkl_fft intel_openmp numpy mkl

As for the wheels package, since we didn’t pack some libraries and VS2017 redistributable files in, please make sure you install them manually. The VS 2017 redistributable installer can be downloaded. And you should also pay attention to your installation of Numpy. Make sure it uses MKL instead of OpenBLAS. You may type in the following command.

pip install numpy mkl intel-openmp mkl_fft

Another possible cause may be you are using GPU version without NVIDIA graphics cards. Please replace your GPU package with the CPU one.

from torch._C import *

ImportError: DLL load failed: The operating system cannot run %1.

This is actually an upstream issue of Anaconda. When you initialize your environment with conda-forge channel, this issue will emerge. You may fix the intel-openmp libraries through this command.

conda install -c defaults intel-openmp -f

Usage (multiprocessing)

Multiprocessing error without if-clause protection

RuntimeError:
       An attempt has been made to start a new process before the
       current process has finished its bootstrapping phase.

   This probably means that you are not using fork to start your
   child processes and you have forgotten to use the proper idiom
   in the main module:

       if __name__ == '__main__':
           freeze_support()
           ...

   The "freeze_support()" line can be omitted if the program
   is not going to be frozen to produce an executable.

The implementation of multiprocessing is different on Windows, which uses spawn instead of fork. So we have to wrap the code with an if-clause to protect the code from executing multiple times. Refactor your code into the following structure.

import torch

def main()
    for i, data in enumerate(dataloader):
        # do something here

if __name__ == '__main__':
    main()

Multiprocessing error “Broken pipe”

ForkingPickler(file, protocol).dump(obj)

BrokenPipeError: [Errno 32] Broken pipe

This issue happens when the child process ends before the parent process finishes sending data. There may be something wrong with your code. You can debug your code by reducing the num_worker of DataLoader to zero and see if the issue persists.

Multiprocessing error “driver shut down”

Couldn’t open shared file mapping: <torch_14808_1591070686>, error code: <1455> at torch\lib\TH\THAllocator.c:154

[windows] driver shut down

Please update your graphics driver. If this persists, this may be that your graphics card is too old or the calculation is too heavy for your card. Please update the TDR settings according to this post.

CUDA IPC operations

THCudaCheck FAIL file=torch\csrc\generic\StorageSharing.cpp line=252 error=63 : OS call failed or operation not supported on this OS

They are not supported on Windows. Something like doing multiprocessing on CUDA tensors cannot succeed, there are two alternatives for this.

1. Don’t use multiprocessing. Set the num_worker of DataLoader to zero.

2. Share CPU tensors instead. Make sure your custom DataSet returns CPU tensors.

Docs

Access comprehensive developer documentation for PyTorch

View Docs

Tutorials

Get in-depth tutorials for beginners and advanced developers

View Tutorials

Resources

Find development resources and get your questions answered

View Resources